Sentence examples for decrease in toughness from inspiring English sources

However, an increase in strength is usually accompanied by a decrease in toughness.

These cracks would result in suppression of improvement or decrease in toughness of the polymer alloy.

The decrease in toughness with increasing functionality was attributed to decreasing particle size.

The initial decrease in toughness was caused by the hampered segmental mobility due to the increased deformation rate.

They show sub-micron grain size of both, the WC and the fcc hard phase and thus substantially higher hardness (with only a small decrease in toughness) as compared to conventionally prepared bodies of the same overall composition.

Subsequent reheating cycles caused by neighbouring weld beads do neither lead to coarsened brittle structures in the heat-affected zone nor to increase in hardness and decrease in toughness, as is the case with wrought steel materials.

Also, there is a clear tendency for a decrease in fracture toughness with increasing impact rate for all materials investigated.

It was found that there is a significant decrease in fracture toughness with increasing mode III loading.

In addition, we find that the decrease in fracture toughness was more significant when the expansive clay such as smectite was included in rock.

The modulus of the MWCNT/PVC composites increased while there was a reduction in their tensile strength, indicating a decrease in polymer toughness.

A significant decrease in strength, toughness and load deflection response was observed with synthetic or plastic FRC (PFRC) when the temperature approached 800 °C.