Your English writing platform
Discover LudwigSuggestions(5)
Exact(35)
This leads to a decrease in the mechanical properties of formed parts.
This may have caused the dramatic decrease in the mechanical strength in water compared with that in air.
However a decrease in the mechanical strength and an increase in the dimensional variations have been recorded.
When increasing the amount of macroporogen the permeability significantly increases and a decrease in the mechanical properties of the scaffolds is observed.
The mechanical characterization under dry and wet conditions showed that increasing collagen content resulted in a tremendous decrease in the mechanical properties.
This could be explained by a decrease in the mechanical as well as thermal stability of austenite with increasing size and austenite volume fraction.
Similar(25)
This work also demonstrated that the decreased crystallinity induced at higher via voltage led to the decreasing in the mechanical properties.
In concretes with alkalis contents lower than 3 kg/m3, even with the same percentages of natural rice husk ash, there were no significant decreases in the mechanical properties.
For example, after application of oxyfuel, laser, and plasma cutting, in the samples of S460 M steel, an increase in the superficial hardness followed by a decreasing in the mechanical properties was reported (Andrés et al. 2016).
Since PEEP elevation may be able to reopen these atelectases, the involvement of these phenomena is substantiated by the most pronounced decreases in the mechanical parameters with increasing PEEP resulting in lower SIII and elevated PaO2, which corresponds to earlier results on similar stiff lungs [ 10].
Sol gel coatings are usually densified using a thermal treatment stage in oven at temperatures above 500 °C that can cause in low melting temperature substrates a decrease in the substrate mechanical properties.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com