Suggestions(5)
Exact(17)
The greater the initial dose and volume fraction of the antibiotics, the greater is the decrease in the hardness.
Group E also exhibited a significant decrease in the hardness value (70%), which does not change significantly with time.
A reduced rate of decrease in the hardness and modulus is observed in the TiN/N+-implanted aluminum.
The concrete valuation of the decrease in the hardness depends on the coating materials.
Furthermore, it also indicates that there appears to be a larger decrease in the hardness than in the Young's modulus with increasing load.
However, a sharp decrease in the hardness was observed after annealing at 1000 °C due to the growth of grain.
Similar(43)
In addition, it is noted that the events of multiple pop-ins are coinciding nicely with sudden decreases in the hardness of measured materials [20].
The generation of defect clusters in the matrix and precipitates slightly increased the indentation hardness, while disordering of the submicron-sized γ′ precipitates resulted in a dramatic decrease in the total hardness, which decreased further during the early stages of the intermixing between γ′ precipitates and matrix (<18 dpa).
However, a gas temperature increase using a higher gas flow rate results in a decrease in the film hardness and an increase in the silicon and hydrogen contents.
It was found that the increase in the Ti layer thickness resulted in a decrease in the effective hardness and elastic modulus, and an increase in the wear rate, plasticity, and toughness.
Improvements in the coating adhesion, H/E ratio and wear resistance were achieved together with a decrease in the coating hardness to 35 45 GPa as the N content in the coatings was increased from 8 to 15 at.%.
More suggestions(2)
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com