Sentence examples for deck height from inspiring English sources

Both solid and porous parapets are tested, and the influence of angle of attack, parapet height, parapet porosity, bridge deck height, end eave length is also investigated.

This paper gives the results of research on Reynolds number effects on steady and unsteady aerodynamic force coefficients measured in the wide Reynolds number region from 1.1×104 to 1.5×106 based on the dimension of deck height.

These parameters are: type of loading, compressive strength of the concrete slab, yield stress of the steel beam, beam span to slab width ratio, steel beam size, existence of the ribbed metal deck, height of the ribbed metal deck, and percentage of transverse reinforcement in the slab.

While the oncoming wind speed was fixed at U∞=8.0 m/s (i.e., the corresponding Reynolds number, Re= 1.01×104, based on the height of the box girder) during the experiments, the gap width between the TBG was varied to have four different gap ratios (i.e., the ratio of the gap width between the TBG to the deck height).

Her rear hull had only 4 feet of freeboard, although she was built up to the normal upper deck height amidships and at the bow for better sea-keeping and to provide for her crew.

Adjust mower deck height.

Finally, by combining these models with a Poisson return model for each storm the associated reliability estimates for various deck heights were estimated.

It covered the side of the ship up to the upper deck, a height of 14 feet above the waterline and reached 4 feet below it.

The forward hangar was 67.2 by and only one deck in height as it was intended to house nine small aircraft, such as fighters.

Vehicle loading is the ratio of the actual load carried to the maximum load that could have been carried within vehicle weight, deck area and height constraints.

A watertight internal cofferdam, filled with cellulose, ran the length of the ship from the protective deck to a height of 4 feet above the waterline.