Sentence examples for deck failure from inspiring English sources

Deck failure was defined as deck plate's ultimate strength becoming lower than the maximum nominal stress.

For a thin wall sandwich structure deck, local buckling failure is most likely the dominant cause of the deck failure.

Specimens in tests exhibited a roughly 10-mm slip between the steel girder and deck before failure; failure modes were fracture of shear studs.

Simply supported multi-span bridges, that comprise the majority of bridges along the US Gulf Coast, are susceptible to the deck unseating failure mode under extreme wave and surge conditions cause by hurricanes.

The objective of this study is to investigate why such hinge bearing did not function and how it contributed to the deck-falling failure of one particular highway bridge stricken by the 1999 Chi Chi earthquake (magnitude 7.3) in Taiwan.

Bridges exposed to flooding, hurricanes, tsunamis, and other extreme hydrologic events have been observed to fail due to deck dislodgement, pier failure, or foundation failure.

This paper investigates the mechanism of the deck strip shear failure experimentally and analytically.

Time to deck plate's failure by ultimate strength varies in a wide range depending on the initial designs and corrosion severity at both local plate and global hull girder levels.

Excessive and consistent vibration will cause the discomfort of working crew, failure of deck facilities even structural fatigue failure.

The strengthening materials increase the punching shear strength of the deck and change the failure mode of the strengthened panel.

Based on a thorough analysis of the experimental results, Saleem et al. (2011) noted that although the proposed UHPFRC waffle deck system exhibits shear failure mode, it has great potential to serve as an alternative to open-grid steel decks, which are conventionally used for lightweight or moveable bridges.