Sentence examples for deck angle from inspiring English sources

Deck screen design parameters e.g. material of construction, deck angle of inclination, the feed throughputs, and physicochemical properties of the particles, are critical factors to consider in solids classification.

The deck vibration frequency, longitudinal deck angle, feeder frequency, and baffle plate height all have significant effects on the separation performance.

These deck angles were continuously transmitted to the Rangekeeper so that it could keep the guns correctly elevated as the ship rolled and pitched.

The helicopter has been held, immersed in the unsteady airwakes of a baseline and modified ship geometries, at important locations through the landing approach path for two oblique starboard wind-over-deck angles.

The effects of vibration amplitude, throwing index, and screen deck inclination angle on the screening process are discussed.

The screening efficiency is highest when the vibration amplitude, throwing index, and screen deck inclination angle are 3 3.5 mm, 2.7 and 15°, respectively.

For shaking table, three main variables are feed water flow rate, wash water flow rate and deck tilt angle.

The highest recovery can observe when deck tilt angle was 12o, feed water flow rate and wash water flow rate were 12 (L/min) (Table 4).

The results also showed that an increase in the deck tilt angle cause a decrease in concentrate grade and an increase in valuable particle recovery.

Therefore, the following points were selected as the optimal values: deck tilt angle 12o, feed water flow rate and wash water flow rate 12 (L/min) and size fraction − 5 + 2 mm.

The aerodynamic admittance function is one of the most difficult to be measured since controlling the incoming flow turbulence spectrum is a primary need and because admittance is a function of the mean wind-to-deck relative angle changing in time and space.