Sentence examples for data of corrosion from inspiring English sources

Comprehensive physico-chemical data of corrosion products from mounds, mounds with protruding tubes and freestanding tubes were examined in detail (Tang et al. 2006; Tamura 2008; Teng et al. 2008; Peng et al. 2010; Swietlik et al. 2012) and used to rationalize a proposed mechanism of formation.

The availability of research data on corrosion in fibre reinforced concrete (FRC) is also limited and not thoroughly understood due to the complex mechanism of corrosion itself (Yoo and Yoon 2016).

An equivalent circuit model is used to quantitatively interpret the impedance data of steel corrosion.

Data for corrosion potential were generated through the exposure-concrete interface, corresponding to a system with a 90% probability of corrosion.

The implementation of new data regarding the performance of corrosion inhibitors is applied through a performance-based method approved by recent European standards for the probabilistic calculus of service life of reinforced concrete structures.

In order to investigate material properties in presence of corrosive environments and applied stresses, many laboratories have arisen and many experimental techniques have been developed and setup in order to collect data about the behaviour of corrosion resistant alloys.

A significant amount of corrosion data was compared for various SiCf/SiCm types tested under different conditions, which suggested that it may be suitable for use in a GFR.

This paper contains novel investigations involving computer-aided durability design, corrosion modeling under varying oxygen, classification and standardization of corrosion product data.

Tables 1 and 2 show the comparative data of average metal loss, corrosion rate, and inhibition efficiency of the corroded samples at different temperature and immersion intervals.

The available in vitro corrosion data of absorbable metals could not be directly compared, as the test condition varies from one report to another.

It is concluded from the corrosion data of this work that in the anode environment of a PEMFC, the AB alloy could be a better candidate than 316L for bipolar plates.