Sentence examples for damping requirement from inspiring English sources
Higher open-loop damping can be achieved for the same closed-loop damping requirement and vice versa.
Analytical treatment of the eigenvalue problem has then led to an explicit expression for the minimum structural damping ratio required to prevent galloping for a perfectly tuned two-degree-of-freedom system, which it has been shown can differ significantly from the damping requirement for single-degree-of-freedom motion.
In addition to the proper performance, the controller seeks to adequately fulfilment the damping requirements, as though both damping and performance requisites are taken into account control policy.
It is seen that the solution process becomes easier if the coupling and damping requirements are first addressed by designing the aileron to rudder interconnect (ARI) gain and roll-yaw rate gains using classical approach and then applying the H-infinity procedure on the plant model, updated with the designed ARI and rate gains, to shape the sensitivity and complementary sensitivity functions.
The effects of near-field ground motions with large velocity pulses have motivated passive damping requirements for the protection of seismically isolated structures.
Typically, that means more and faster energy injection/absorption from the BESS than 5% damping ratio requirement.
To visually inspect the nonlinear effect of converter power limit, the following case study is presented with a 10% damping ratio requirement for the target mode.
Consider the worst case in subsection-b, i.e. with 3 MW converter power limit for each BESS and 10% damping ratio requirement for the target mode.
Methods of incorporating closed-loop stability and damping performance requirements into the design are explained.
The IPCs follow a bending-dominated deformation behavior and are potential candidates for applications were damage toleration and vibration damping is a requirement.
2.2 and Fig. 9, it is easy to obtain the basic requirements for damping the resonance peak as well as to find a suitable AD feedback, as given in Table 2.
