Sentence examples similar to cylindrical collection from inspiring English sources

Note that the light entered the spectrometer without an entrance slit, collimated by an SAG+UPG mirror onto a 600 lines/mm groove density grating blazed at 500 nm (Ocean Optics grating #3), focused successively by another SAG+UPG mirror, a cylindrical detector collection lens and a OFLV-350-1000 variablongong pass order-sorting filter onto a Sony ILX511 CCD array detector with 2048 pixels.

Figure 6 X-ray collection using cylindrical monocapillary.

The problem of current collection by cylindrical Langmuir probes in collisionless plasmas is used for validation.

EUPIC simulations of current collection by cylindrical Langmuir probes in collisionless plasmas show good comparison with previous experimentally validated numerical results.

Replacing the device tuning fork-optical fibre by a fixed X-ray cylindrical capillary the XRF collection concept feasibility is demonstrated on a test sample, composed of bulk Co and Ti juxtaposed sheets.

The capillary gain G regarding a pinhole of the same radius is given by the equation[10]: G ≈ θ 1 WD + L / r cap 2 (5) Figure 7 X-ray collection using cylindrical monocapillary.

Sampath and Keighin (1982) model the rock as a collection of cylindrical pores, where k ∞ ∝ r 4 and ϕ ∝ r 2 so that r slip r slip ∝ (k ∞/ϕ 1/2 and b ∝ (k ∞/ϕ)−1/2 e.g., Sampath and Keighin 1982).

In the modelling, modifications have been made to the grounded cylindrical collector of electrostatic precipitation through a re-design to include a series of inclined baffle plates for improving the particulates' collection efficiency.

When Mio, a Philadelphia sustainable-design company, included a bright green cylindrical worm composter in a collection it sold at Target during a limited run a few years ago, the eco-design crowd cheered.

A structural model of mesoporous carbon (CMK-3) prepared from the templating of SBA-15 silica materials named M_CMK3 and a mixed geometry model, representing the porous space as a collection of slit, cylindrical and M_CMK3 pores, is theoretically evaluated, developed and applied to the characterization of an experimental sample [1].

Flow problems considered include unsteady one-dimensional shock interface collision, steady interaction of a planar interface and an oblique shock, planar shock interaction with a collection of gas-filled cylindrical inhomogeneities, and the impulsive motion of the two-component mixture in a rigid cylindrical vessel.