Sentence examples for cylinders fixed from inspiring English sources

A grid arrangement of hundred rectangular cylinders fixed to the facade of a house generates strong and disturbing mono-harmonic noise.

The micro-structure of the inclinometer was a four vertical cantilever beams, a center mass with a rigid cylinder fixed on it.

Figure 2 shows the experimental setup for tracking the assembly of a ring-shaped object into a cylinder (fixed on a table).

Three different experimental conditions were examined: (i) both cylinders were allowed to vibrate; (ii) the downstream cylinder only was allowed to vibrate with the upstream cylinder fixed; and (iii) the upstream cylinder only was allowed to vibrate with the downstream cylinder fixed.

The experimental investigations on the pressure distribution around a large vertical cylinder fixed on a wave channel, piercing the free surface and subjected to regular waves have been carried out.

Five months after the initial implant surgery, a second surgery for flap reflection was performed and provisional restoration was done with a temporary cylinder fixed on to the implant (Fig. 6a c).

The inner cylinder was rotated (with the outer cylinder fixed) at circumferential Reynolds numbers ranging from 1.05 to 7.50 times the critical value for the onset of laminar Taylor vortex flow.

This paper presents an experimental study on the closed-loop control of the vortex-induced vibration of a flexible square cylinder, fixed at both ends, in a cross-flow.

Measurements were carried out in a special test chamber, in a wind tunnel, with both models vibrating as well as with the upstream cylinder fixed in a turbulent flow.

For a hollow cylinder fixed on the inner surface and subjected to tangential tractions on the outer surface (or vice versa) the through-the-thickness in-plane shear stress distribution is also universal and is determined by surface tractions and the outer radius of the cylinder; it is independent of the spatial variation of the shear modulus.

For Phase Ib of the project, simulated hydrodynamic loads on a flexible cylinder fixed to a sloped bed were validated against test measurements made in the shallow water basin at the Danish Hydraulic Institute (DHI) with support from the Technical University of Denmark (DTU).