Sentence examples for cycle reduction from inspiring English sources

Optimum process parameters for a six-log cycle reduction of B. cereus spores were obtained: pressure, 540.0 MPa; temperature, 71 °C; and pressure-holding time, 16.8 min.

For a diagonally dominant matrix, extended Thomas algorithms and cycle reduction to replace the graphics processing unit component are proposed in the solver.

The optimum process parameter values for a 5-log cycle reduction of spores were calculated as 477 °Ca/48 °C for 26 min and 495 °Ca/49 °C for 30 min in water and in milk, respectively.

Selective reversible electroswitching from bonded to unbounded state of one of the three bonded APCO2− occurs after the electrochemical cycle reduction of MVCA-C108+ to MVCA-C104+ and reverse oxidation.

The cycle reduction of the proposed CAVLD is persistent regardless of QP values.

Topiramate represents an additional therapeutic option that is able to act at different levels of the migraine cycle: reduction of frequency in episodic migraine, prevention, and treatment of CM.

Our formerly published experimental results of studies on inactivation of Bacillus subtilis As 1.173 spores by high hydrostatic pressure and heat using design of experiments showed that the optimum process parameters for a six log-cycle reduction of spores of B. subtilis were obtained as: pressure, 576.0 MPa; temperature, 87 °C; and pressure holding time, 13 min.

Our published results and our studies for optimization of process conditions to inactivate Bacillus subtilis by high hydrostatic pressure and mild heat using response surface methodology indicated that the optimum process parameters for a six-log-cycle reduction of B. subtilis were obtained as temperature, 46 °C; pressure, 479 MPa; and pressure holding time, 14 min.

Propeller selection, waterjet analysis, review of alternative propulsors; thermodynamic analyses of Rankine, Brayton, Diesel, and Combined cycles, reduction gears and integrated electric drive.

After initial drop of capacitance up to 500 cycles, reduction was relatively slow up to 2000 cycles during stability analysis.

The optimum process parameters for six log-cycles reduction of Bacillus subtilis spores were obtained as: temperature, 87 °C; pressure, 576.0 MPa and pressure holding time, 13 min.