Sentence examples for cycle of valve from inspiring English sources

To find life cycle of valve, the developed control and monitoring system is integrated with an axial valve experimental test set up.

The control system monitors number of compression cycles of any bellow or closing and opening cycle of a valve.

In state B of cycle, the valve at the inlet of condenser is open, and the continuing of the heating at constant pressure induces the desorption of refrigerant (adsorbate) from the adsorbent towards the air-cooled condenser to be condensed at condensing temperature T c (processes B C).

A numerical model for low cycle fatigue damage analysis of valve membranes is presented in this paper.

A control system with feedback loop is designed, developed and tested to monitor the life cycles of the axial valve and bellows used in vacuum valves.

A temporal resolution of less than 50 ms is readily achievable, enabling accurate assessment of valve structure and function throughout the cardiac cycle [5].

At the end of the cycle for that valve send out the summation of BTU to be logged by the computer, this also allows us the resolution of which loop inside each zone draws more heat.

In order to perform proportional flow control pulse width modulation was used to control the duty cycle of the ultrasonic power transferred to the valve.

In this work, the effects of thermal and compositional stratification on the ignition and burn duration of homogeneous charge compression ignition (HCCI) combustion are studied with full-cycle 3D computational fluid dynamics (CFD) simulations with gasoline chemical kinetics performed during the closed portion of the cycle, from intake valve closing (IVC).

Results are obtained for two valve seat designs over a range of valve gaps.

The percentage closure of valve is obtained for each valve.