Sentence examples for cw power from inspiring English sources

The highest CW power is achieved for Yb-doped fiber laser (YDFL) amounting to 10 kW at ~1.07 μm in single-transverse-mode (singlemode) regime4,5.

The continuous wave (CW) power is transmitted from the gyrotrons to EAST via low-loss evacuated waveguide transmission lines.

The primary objective of this paper is to present the complete RF, magnetic and thermal design of a high CW power circulator.

The system relies on 4 Klystrons TH-2103Ddelivereliver 500 kW CW power each at 3.7 GHz to maintain plasma discharge.

High power microwave absorbers/dummy loads are required to condition the klystrons at high CW power level and to protect them against reflection.

The 82.6 GHz gyrotron delivers 200 kW CW power (1000 s) while the 42 GHz gyrotron delivers 500 kW power for 500 ms duration.

Fig. 3 Subthreshold DC spectrum of device measured at 30 °C. Figure 4a shows the typical CW power-current-voltage (P-I-V) curve of the DFB laser at different heat sink temperatures between 20 and 90 °C.

The measured CW Power-Current performance of a device with cavity length of 1.1 mm shows that the threshold current (Ith) and slope efficiency are 55 mA and 0.27 W/A at room temperature, respectively.

Figure 2 shows the CW power-current-voltage (PIV) characterization of three DFB QCLs with the cavity lengths of 1, 1.5, and 2 mm and ridge width of 9 μm.

Type-I devices, which generally take advantage of a more mature growth technology, have thus far maintained the highest cw output powers and power-conversion efficiencies for both electrical and optical pumping at T ∼ 77 K.

Compared with CW operation, power saturation and kinks in the output power characteristics are greatly reduced in pulsed mode, which is attributed to reduction in device heating.