Sentence examples for cutting tip performance from inspiring English sources

In operations dominated by interrupted cutting conditions with high loads/impacts coated cemented carbides with WC-Co graded outer-surfaces presented superior wear properties mainly due to stable cutting tip performance.

The cutting tip winds into the tree with a small core of the wood now inside.

Unlike most metals, conventional hardness levels in ceramics generally remain high at elevated temperatures, which means that cutting tip integrity is relatively unaffected at high cutting speeds.

Pure water, functioning as the cooling fluid, is pumped through micro-channels to reduce the temperature near the cutting tip.

As shown in Figure 13(b), at the internally-cooled cutting tool, micro-channels (coolant inlet and outlet) are machined within the solid cutting insert, which are close to the cutting tip where the maximum heat being generated.

From these results, the distance of the nozzle to the cutting tip can be estimated.

The preliminary cutting trials using the internally cooled smart cutting tool have demonstrated the temperature of the cutting tip can be reduced by pumping the coolant through internal micro-channels within the smart cutting tool.

Open the preheat oxygen valve on the torch, oxygen should flow out from the cutting tip.

Vapour deposition of titanium nitride on WC/Co or hard ferrous-based cutting tips generally results in significant increases in cutting tool life.

I asked readers to share their favorite cost cutting tips and some great ones rolled in.

Many rotary files have a body guided by a passive non-cutting tip that makes dentin cut more circumferentially.