Sentence examples for cutting nozzle from inspiring English sources

Select a torch and cutting nozzle according to your cutting task.

Increase the gasoline flow gradually until a mist sprays out from the cutting nozzle and light it.

Results of this exercise show the importance of well-designed nozzles for cutting with DDL's and specifically the need to take the beam shape and laser quality constraints into consideration.

The width of laser cut or kerf, quality of the cut edges and the operating cost are affected by laser power, cutting speed, assist gas pressure, nozzle diameter and focus point position as well as the work-piece material.

This paper presents a neuro-genetic approach proposed to suggest the process parameters for maintaining the desired depth of cut in abrasive waterjet (AWJ) cutting by considering the change in diameter of focusing nozzle, i.e. for adaptive control of AWJ cutting process.

The managers' repair plan involves cutting off the portion of each nozzle that has the cracks, inserting a length of replacement pipe and welding it to the outside of the vessel.

In addition, significant reduction of cutting force and cutting temperature were obtained when using OD30 nozzle at the nozzle distances of 6 9 mm and the input air pressure of 0.4 MPa.

At hundreds of cutting stations inside Van Dyke, robotic machines would cut the intricate parts, lubricated and cooled by nozzles squirting a mix of water and lubricant directly onto the cutting tools and the metal being cut.

In the MQCF system, pressurised air is mixed internally with the cutting fluid, forming a uniform mist at the nozzle exit.

I could have formed the dumplings using a damp spoon, or I could have squeezed them right into simmering water using a pastry bag, cutting them off as they emerged from the nozzle.

Two typical subsonic nozzles are designed for the laser cutting experiment.