The phrase "cut speed" is grammatically correct and can be used in written English. It is often used in the context of reducing or decreasing the speed of something. For example: - "In an effort to conserve fuel, the pilot decided to cut speed and fly at a slower pace." - "For safety reasons, the city council has implemented new regulations to cut speed limits on residential streets." - "The athlete was able to cut speed and perform a graceful landing during her final gymnastics routine."
Contrary to instructions, he had, he admitted, cut speed to 18 knots, not zig-zagged and come near shore.
Instead of commands to cut speed or check mirrors, they offer the traveller a series of life-affirming mantras.
Spain, which gets 12% of its oil from Libya, has cut speed limits to conserve fuel stocks.Oil traders are preparing for a lengthy absence from world markets of much of Libya's exports of 1.4m barrels a day (b/d).
Cheaper models cut speed, capacity and features; none includes a digital connector for monitors or a tuner for one of the most popular formats of all: radio.
AM for Brecon and Radnorshire and Welsh Liberal Democrat leader Kirsty Williams urged ministers to take immediate action to cut speed limits on "a dangerous stretch of road".
The effects of the mouldboard depth of cut, speed of operation, cutting angle and the lifting angle on the tillage forces were investigated in this study.
Nor does greater policing: stringent enforcement campaigns in France and Spain have successfully cut speeds, but Britain has seen a 20% drop in the number of traffic cops in the past decade, reckons Edmund King of the AA, a motoring lobby.
Cutting speed, feed rate, depth of cut and types of cutting fluids were considered as input parameters.
Cutting speed and feed rate each at five levels were selected as cutting variables.
Cutting speed (Cs) was observed from machine tool monitor screen which gives linear cutting speed in terms of mm/min, therefore, MRR for the WEDM operation can be calculated using Eq. 1. MRR = Cs × L (1 where, MRR = material removal rate.
Cutting speed, feed rate and depth of cut were chosen as the cutting parameters.
