Sentence examples for cut profile from inspiring English sources

Thus, the cut profile and instantaneous chip thickness are obtained by accounting for chatter motions along both axes.

The Design of Experiments (DoE) technique is used in order to outline the main parameters which define the geometry of the cut profile, as well as its constancy (i.e. stability).

The design of experiments (DoE) techniques is used in order to outline the main parameters which define the geometry of the cut profile, as well as its constancy for Hardox-400 material plate.

Improvements such as an increase in side-wall steepness of 162% are achieved over a standard profile, flat bases to the cut profile and a reduction of profile to surface inter-section radius enable the process to be analogous to traditional milling profiles.

Use other bits to cut profile edges with a plunge router following the same procedure.

On the basis of optimization results it has been found that the optimal parameter level suggested for straight cut profiles are not valid for curved cut profiles.

The results indicated that the optimum input parameter levels suggested for curved cut profiles are entirely different from straight cut profiles except kerf width.

The optimized parameters for straight and curved laser cut profiles have been compared.

Based on the Taguchi quality design concept, an L27 orthogonal array has been used for conducting the experiments for both straight and curved cut profiles.

A higher resolution based L27 orthogonal array has been used for conducting the experiments for both straight and curved cut profiles.

Lasers also are used to drill and cut ceramics and substrates for integrated circuits; the aircraft industry uses CNC-controlled lasers to cut profiles and to drill holes in engine parts.