Sentence examples for current responses with from inspiring English sources
Further studies have elucidated that the increasing of the pulse voltage from 1.0 to 1.5 V and the pulse duration from 50 to 100 ms can produce quite different current responses with various amplitudes and speeds, as shown in Fig. 4a.
As a result, PEDOT PTS films hybridized with rGO showed a greater current response with increasing bias than the pure PEDOT PTS film [Figure 7 (II), curve (a)].
The fabricated sensor based on POA/GR31-modified GCE exhibited enhanced current response with very high sensitivity of 47.1 μA μM− 1 for the detection of NADH.
Correlations primarily manifest themselves through an overall reduction in magnitude and shift in the onset time of the current response with increasing interaction strength.
The effect of different supporting electrolytes was investigated by measuring the current response with LiNO3, NaNO3, and KNO3 over a range of pH.
A slow current rise (with a photocurrent of 2.0 μA and a rise time of 2.7 s) superposes a relatively fast current response (with a photocurrent of 6.8 μA and a rise time less than 0.3 s) in air.
The developed sensor exhibited amelioration in the peak current response with a negative shift in the peak potential in comparison to multi walled carbon nanotubes modified GCE and bare GCE.
Increase in the oxidation current response with a negative shift of the anodic peak potential was observed at the cationic PDMA film-coated BDD (PDMA|BDD) electrode, compared with that at the bare BDD electrode.
In the hydrodynamic amperometry using the [Fe CN 6]3−/4−|PDMA|BDD electrode, a successive addition of 1 μM AA caused the successive increase in current response with equal amplitude and the sensitivity was calculated as 0.233 μA cm−2 μM−1.
The overall drain current responses linearly with drain biases, indicating an ohmic-like contact behavior of graphene/SWCNTs junctions.
