Sentence examples for curing methods for from inspiring English sources
Selected curing methods for the POCPC samples were full water curing, air curing and 3 days water curing respectively.
In addition, to improve the physical and mechanical properties of the recycled coarse aggregate (RCA), two curing methods for the RCA were implemented using cement slurry and Styrene Butadiene Rubber (SBR) compound.
UV curing method is known as a low-temperature and fast curing method which can meet the demand for low-temperature manufacture of electronics.
In this work, a smart curing method for the co-cured aluminum/composite hybrid shaft which can reduce the thermal residual stresses generated during co-curing bonding operation between the composite layer and the aluminum tube was applied.
Microwave (MW -accelerated curing has eMW -acceleratednovative and popular curing methas for concremergederiass.
From Table 2 the launderability results for pad-dry and pad-dry cure methods for all three agents against both microbes showed that curing was not required for triclosan and N9 pure silver to bind these on cellulose as no such difference in the antimicrobial activity was found for both the padding techniques up to their 5th laundering cycles.
This installment is on traditional salt-curing methods for game, with a recipe that calls for yogurt whey, juniper dust, spruce resin and melted beeswax, and takes seven months to complete.
AAGU samples were prepared with the combined activators (Na2SiO3aq + NaOHaq: (Na2SiO3aq + NaOHaq)/(GSS + UPOFA) = 0.5) while different curing methods namely: oven-cured (60 °C for 24 h), water-ponding and room-cured (25 °C) were also investigated.
From the experiments, it was found that the application period for curing using the mobile MW-curing unit was considerably shorter than for conventional curing methods.
Moreover, experimental investigations showed that the application period for curing using a mobile MW-curing unit was considerably shorter than that in autoclave curing methods.
The versatile curing method can be used for the STL of practically most other vinyl/allyl modified preceramic polymers.
