Sentence examples for curing cycle from inspiring English sources

Investigation of the curing kinetics of a resin is one of the prerequisites for designing and optimization of the process parameters for the curing process which will help to control and predict the curing cycle of the materials.

For IO curing, the oven temperature was maintained at 60 °C, however for SC curing; the solar-box chamber has achieved maximum inside temperature up to 90 °C for each curing cycle.

For these experimental studies the carbon fiber reinforced epoxy laminates were fabricated using a heated vacuum assisted resin transfer molding (H-VARTM®) method followed by a 2 soak curing cycle.

When that's finished, you'll have to run the smoker through a curing cycle to get rid of all the residues left behind by the manufacturing process.

Ramezanianpour et al. (2013) suggested an optimum steam curing cycle at the maximum temperature of 60 °C for 10 h, with an extra 3-h preheating for SCC made of Type II cement.

The final dynamic mechanical properties of the DGEBA/IL networks are strongly dependent on the curing cycle.

The parameters studied include part angle, thickness, lay-up, flange length, tool material, tool surface, and cure cycle.

Finally, the model is used in a parametric study to investigate the effect of fibre architecture, cure cycle temperature and resin initial degree of cure on tow impregnation rate and to predict the possible occurrence of flow-induced micro-voids.

Therefore, in this work, the strength and thermal residual stress of the epoxy adhesive at cryogenic temperatures were measured with respect to cure cycle.

The dynamic mechanical properties of blends of diglycidyl ether of bisphenol-A based epoxy resin and internally epoxidized polybutadiene rubber have been studied as a function of initial rubber content, stoichiometry and cure cycle of the epoxy resin.

The samples were subjected to cure cycles with different heating profiles.