Sentence examples for cure depth from inspiring English sources
Cure depth experiments were performed to determine the curing characteristics of the synthesized PPF, and the resulting system and prepolymer were used to construct a 3D porous scaffold with interconnected pores of ∼100 μm.
In this study we hypothesize that combining these two UV filters will result in a synergistic effect that controls cure depth and avoids dark cure.
Our recent investigations into the 3D printing of poly(propylene fumarate) (PPF), a linear polyester, using a DMD-based system brought us to a resin that used titanium dioxide (TiO2) as an ultraviolet (UV) filter for controlling cure depth.
We believed that the curing depth was affected by D while the curing degree was affected by both UV curing time and D according to the results from Fig. 5 and Fig. 6a.
It was curing depth and curing degree at different depth of the films that made the electrical resistivity of the silver films different.
When D decreased, the accumulation of heat became faster and the curing depth became deeper, the carbon inside the films may be removed because of the increasing temperature.
Moreover, the curing depth will be deeper and the removal of the organic substances will be promoted when D decreases, which means radiation becomes stronger.
It meant that the curing depth increased as the decrease of D. When curing depth was too small to eliminate all organic solvents in inkjet-printed silver film, only the organic substances nearing to the surface were removed that had little effect on the surface morphology.
While D decreased, the silver films were exposed to higher levels of UV radiation, which meant the curing depth became deeper, the UV curing and the generation of heat became faster.
Recently, Chang et al. [ 19] measured the polymerization temperature at multiple spots along the external surface of a Class II cavity according to the curing depth and approximation to the cavity wall using infrared thermography.
Regarding carbonation, with an increase in slag content or reducing the initial curing period, carbonation depth increases.
