Sentence examples for cu removal from inspiring English sources

For comparison, a Cu removal of <50% was measured in polyacrylate latexes prepared by emulsion ATRP using dNbpy as a sole ligand.

Complementary information is obtained from density and porosity measurements and attempts at Cu removal from the jaws using EDTA, an effective metal chelator in most biological systems.

These results suggest a slower and continuous injection for the best Ni or Cu removal, but a faster and step-gradient injection for Zn or Pb removal.

The role of pretreated sporopollenin (PSp) biomass in M II) (M = Pb, Cu) removal from aqueous solutions was investigated by batch biosorption technique.

The solid waste obtained from this process (VTXO) was reused as adsorbent material for Cu removal in the form of the complex Cu-NH3 because this process was done in an ammoniacal medium.

It is shown that >98% of the residual Cu was removed after 14-h of electrolysis at a voltage of 3 V, and >99% Cu removal was achieved after 7-h treatment at 9 V.

They found that E. coli was able to remove Pb and Cu with removal percentage of 45% and 62% respectively.

While E. acrogens was able remove Cd and Cu with removal percentage of 44 and 34% respectively.

A perfect correlation (with R2 = 0.9986) between the statistical model and experiment was found for Cu (II) removal from aqueous wastewater using the adsorbent.

In case of Cu the removal efficiency is observed to be increased sharply at a blend ratio of 5 5 0:10 in case of synthetic solution as well as industrial wastewater also.

However, the concentration of remaining heavy metals is found to be minimum at ratio of 3 7 in terms of Cu and Pb removal and at ratio of 5 5 in terms of As while at 7 3 in terms of Cd removal.