Sentence examples for crush strength from inspiring English sources

A pre-crushed, deformable aluminum impact interface (Hexcel, Stamford, CT, 3.76 MPa crush strength) was used to ensure uniform loading over the femur.

Crush strength was measured using soft aluminium anvils.

For handling purposes the granules crush strength should be at least 13.73 N, a crush strength of 22.56 N or greater being highly desirable [22].

The average crush strength of 10 granules for each batch is presented (Table 3).

The influence of silicon carbide thickness was determined to allow for normalisation of all crush strength measurements to a crush strength at an equivalent thickness of 35 μm.

According to this study, the mean plateau stress is not only related with the out-of-plane crush strength, but also related to in-plane crush strength.

The experimental results indicate that the normal crush strengths under combined compressive and shear loads are lower than that under pure compressive loads.

The experimental results show that the normal crush and shear strengths in combined loading regions and the normal crush strengths in pure compressive loading regions of the non-proportional combined loads are quite consistent with the existing phenomenological yield criterion based on the experimental normal crush and shear strengths under proportional combined loads.

The cold crushing strength (CCS) was determined after firing.

Crushing strength of wet cylindrical agglomerates was estimated.

The crushing strength of concrete infill was taken as 0.67 times the experimental compressive strength.