Sentence examples for cross sectional thickness from inspiring English sources

7 5} sqrt {text{D}} ;{text{MN/m}}^{2} (1 where, IL (50)—point load lump strength index in kgf/cm2; P Peak load at failure in kgf; DW the minimum cross sectional area in cm2; D mean cross sectional thickness of specimen in cm; W mean width of specimen in cm; D standard size of lump (5 cm).

Cross sectional thickness of swollen lamellae may increase in size giving the appearance of transverse segments, though this may not completely explain its depth dependent lengths, as long as 50 μm in the posterior stroma.

This equation for designing bearing lengths is a function of the cross-sectional thickness and distance from the die center of die exit section.

Atomic force microscopic (AFM) measurements were conducted to study the top-view images and cross-sectional thickness of the FLG material.

The average cross-sectional thickness of the graphene sheets is found to be around 3.2 nm. Figure 3d reveals the existence of 6 8 layers of graphene sheets, considering the thickness of the monolayer graphene is 0.33 nm67.

When the cross-sectional thickness of the electrospun layer was decreased together with smaller pore-size, it resulted in the increased flux with high salt rejection.

A hybrid computational system, composed of the finite element method (FEM) and cascade neural network system (CNNs), is applied to the identification of three geometrical parameters of elastic arches, i.e. span l, height f and cross-sectional thickness h.

From simulation results, it was found that the exit velocity of the workpiece varied depending on the cross-sectional thickness of the exit and the amount of deflection of the workpiece was not greatly affected by variations of either the workpiece temperature or punch velocity under the present simulation conditions.

This thin walled structure with constant cross-sectional thickness is loaded with subsoil pressure, snow and surface as well as dead loads and we look for the critical pressure value, when stability loss would be observed; it is done to design in the probabilistic context the safety margins.

The average cross-sectional thickness of sheets is measured from the FESEM image, which is close to ~21.0 ± 5.0 nm.

According to our previous study, the cross-sectional thickness of the nanonetwork layer is approximately 200 nm for the E1 specimen and 300 nm for the E2 specimen [21].