Sentence examples for cross sectional specimens from inspiring English sources

These results have been tested by examination of cross sectional specimens by transmission electron microscopy (tem), prepared by ultramicrotomy techniques which showed that the barrier film was missing at some sites and significantly flawed in others.

Since our aim was to obtain high quality quantifiable data with minimal operator input and bias, we adopted a micropillar geometry for the cross sectional specimen preparation, rather than the conventional lamella geometry.

A second compression fixture was developed to axial load omega cross-sectional specimens with strain rates from 2×10−4 to 5s−1.

Cross-sectional specimens (transversal cuts with respect to the rolling direction) show a substantially higher sensitivity to corrosion phenomena compared with longitudinal cuts and they release nickel ions at rates 10 100 times higher.

High-resolution TEM imaging was performed from two cross-sectional specimens.

The formation and evolution of Ge-NCs have been investigated using high-resolution electron microscopy (HREM) on cross-sectional specimens.

TEM observations were done in an FEG 2200FS JEOL instrument on <011> cross-sectional specimens prepared by the standard sandwich procedure and finally thinned with Ar ion bombardment.

The cross-sectional specimens are prepared with conventional processes: cutting, gluing, polishing, and ion milling (PIPS 691, GATAN) operated at 5 keV.

TEM cross-sectional specimens were prepared by conventional mechanical and ion milling techniques, and the observations were carried out with a JEOL 2010F microscope operating at 200 kV.

Cross-sectional specimens suitable for HR-TEM were prepared using a focused ion beam (FIB) FEI Quanta FEG dual-beam system (FEI Co).

Cross-sectional specimens were prepared by standard procedure involving grinding, dimpling, and Ar+ ion beam thinning until electron transparency for their observation by transmission electron microscopy (TEM).