Sentence examples for cross section where from inspiring English sources
The sectional maximum stress is found at the location on the cross section where y is the largest and can be written as σ v max = M y max I = 6 M A 1 2 A 2 = 9 8 q L 7 2 W 0 3 2 x L 1 2 Open image in new window (12).
This case is a transition in diameter of a steel shaft, assumed as the critical cross section where bending and torsion moments are applied.
In this chapter, it may be concluded that local buckling takes place before the fully plastic condition is satisfied at the cross section where internal forces are most severe.
The capacity of structural systems subjected to shear loads commonly distinguished by discontinuities such as point loads or supports, or abrupt changes of cross section, where complex fields of stresses and strains are generated, is vital information for design.
The process is analogous to the fusing of ink or toner onto paper in a printer (hence the term printing) but is actually the solidifying or binding of a liquid or powder at each spot in the horizontal cross section where solid material is desired.
The corroded zone can be divided into three regions according to the Ca/Si molar ratio of the cross section, where dissolution of CH, carbonation and dissolution of carbonates, and multi-decalcification of hydration products occurred gradually from the internal to the external.
Similarly, the percentage of cross sections, where stent area was ≥90% of the average reference lumen area, increased from 29% to 56% (p <0.001) with postdilatation.
The focus is set on the detailed analysis of existing river cross sections where the sediment continuity is interrupted (e.g. slit and check dams).
A particular problem of minimization of the mean deflection of the shell with cracks at the cross sections where stiffeners are located is treated in a greater detail.
In the analysis of cross sections at 0.5-mm axial intervals, the percentage of cross sections, where stent area was ≥80% of the average reference lumen area, increased from 51% to 78% (p <0.001).
The Z(ll) + b-jets cross sections (where ll = mu mu or ee) are measured separately for a Z boson produced with exactly one b jet and with at least two b jets.
