Sentence examples for cross section test from inspiring English sources

Locations of the failed solder joints and failure modes are examined by the dye penetration test and cross section test.

Dog-bone CLC specimens of length 600 mm and 150 mm × 100 mm cross section (test region) were cast with different synthetic fiber dosages and tested under uni-axial tension.

The scientists emphasized that a cross-section test should be done.

Given the fact that little experimental information on ferritic stainless steels is currently available, the purpose of this investigation is to report a series of material and cross-section tests on ferritic grade EN 1.4003 (similar to 3Cr12) stainless steel square and rectangular hollow sections to enable a better understanding of their material response and structural performance.

We apply this approach to carbon and hydrogen isotope data obtained from reactive transport simulations of an organic contaminant plume in a two-dimensional aquifer cross section to test the applicability of the method.

This was attributed to the fact that in the half-hole test the load carrying yarns were cut along the cross section for testing.

A total of 12 specimens with a circular cross section were tested under axial compression.

Seven full-scale CFFT beams, 3200 mm long and 305 × 406 mm2 cross section, were tested under a four-point bending load and were compared to two control steel-reinforced concrete (RC) beams.

In this study, four series of cross section are tested as shown in Fig. 2.

High-strength RC deep beams with rectangular cross section were tested by Yang et al. (2006).

All herbs will be authenticated by macroscopic and microscopic examination of cross sections, chemical tests and chromatographic analysis.