Sentence examples similar to cross section surfaces from inspiring English sources

Fig. 14 Ge Auger electron map of the small angle cross section surface.

From the cross section surface of Log E and G, we can confirm the effectiveness directly.

SEM image of small angle cross section surface of the layer containing GeSi QDs on B 1 specimen.

LM and SEM EDX analysis of the cross section surface confirmed that the metallic particles were brass with a copper to zinc ratio of approximately 85:15.

The micro hardness of coatings is measured by Vickers micro hardness device (BUEHLER) at the polished cross section surface according to ISO/IEC17025 standard.

By contrast, as a relatively low scanning speed of 200 mm/s was employed, the top surface appeared to be smooth free of less metallurgical porosity and no apparent inter-layer porosity on the cross section surface attributing to the escaping of porosity, indicating an well metallurgical bonding of the neighboring layer towards the building direction.

In brief, total cross section surface area of the construct was quantified for both groups, GBP-1 EPC and control EPC, according to the method previously described by Arkudas et al. [ 27].

In engineering, they are also used to indicate cross-section surfaces.

Figure 10 shows the cross-section surfaces of Log E and G.

But, when the holes were large (3), crack was appeared on the surface of the log Fig. 10 Cross-section surfaces.

Polyelectrolyte multilayers (PEMs) of poly acrylic acid) (PAA)/poly allylamine hydrochloride) (PAH) were successfully deposited onto novel nano-striped surfaces, which were generated using the cross-section surfaces of multilayer polymer films made from poly ethylene-co-acrylic acid) (EAA) and linear low-density poly ethylene-co-acrylic