Sentence examples for cross section surface from inspiring English sources

By contrast, as a relatively low scanning speed of 200 mm/s was employed, the top surface appeared to be smooth free of less metallurgical porosity and no apparent inter-layer porosity on the cross section surface attributing to the escaping of porosity, indicating an well metallurgical bonding of the neighboring layer towards the building direction.

Fig. 14 Ge Auger electron map of the small angle cross section surface.

From the cross section surface of Log E and G, we can confirm the effectiveness directly.

SEM image of small angle cross section surface of the layer containing GeSi QDs on B 1 specimen.

LM and SEM EDX analysis of the cross section surface confirmed that the metallic particles were brass with a copper to zinc ratio of approximately 85:15.

The micro hardness of coatings is measured by Vickers micro hardness device (BUEHLER) at the polished cross section surface according to ISO/IEC17025 standard.

The coatings were characterized for their cross-section, surface morphology, phase composition, indentation fracture toughness, elastic modulus and residual stresses.

The morphology of PU membrane was characterized by scanning electron microscope, and these images indicated that regular micropores were formed on cross-section surface.

Cyclic voltammetry and rotating disc electrode data show that high cathodic oxygen reduction current densities (−150 A m−2 at 3000 rpm, calculated per flat cross-section surface area) have been achieved in 0.5 M H2SO4 solution.

The diffusion of species from the SG phase at the cross-section surface was observed at the first step of fabrication (insufficient SG condensation) and disappeared after hydrothermal treatments (improved SG condensation).

Figure 11 shows the outer appearance and cross-section surface of Log H after the reaction of the expansion agent in Experiment 2.