Sentence examples for cross section required from inspiring English sources

The experimental absorption cross section required for this determination is derived from the theoretical one, taking into account the laser bandwidth.

Even with the potential for slight inaccuracies in the strain gage readings due to localized cracking and the slight reduction in cross section required for mounting the gages, the measured readings offer a valuable basis of comparison with the AASHTO LRFD-10 equation.

Even with the potential for slight inaccuracies in the strain gage readings due to localized cracking and the slight reduction in cross section required for mounting the gages, the measured readings offer a valuable basis of comparison with the moment curvature results.

Calculation of the acoustic impedance for a non-uniform distribution of the sound pressure and the sound velocity on a duct cross section requires determination of the acoustic power transmitted along/radiated from a duct.

Nine different fuel assembly types were analyzed in WIMS9 to generate the two-group cross sections required by the PARCS core simulator.

The non-circular shape of their cross sections requires the use of a rotational degree of freedom to describe their movement.

However, given the small crystal cross-sections required to obtain very high resolution, discrete designs are typically expensive, have low packing fraction, reduced light collection, and are labor intensive to build.

The slight but consistent discrepancy between the LSF and linear LIF measurements at local equivalence ratios above 1.6 may be attributed to a change in the collisional branching ratio from lean to rich stoichiometries and/or the need for further work on the electronic quenching cross-sections required for quantitative NO measurements under fuel-rich conditions.

The dependency on experimental techniques for the aeroelastic characterization of the bridge deck cross-section requires a substantial amount of resources, and consequently the number of potential candidate designs must be limited.

Establishment of long-distance cooling techniques and design of a compact cross section are required for development of HTC superconducting underground power cables.

These definitions in a concrete cross section are required for the PEF analysis, because variation of temperature across the section is highly dependent on the state of damage.