Sentence examples for cross section ratio from inspiring English sources
The diodicity has a maximum at intermediate values of the Knudsen number and increases with large to small cross section ratio.
The first such result is an inclusive charged current cross section ratio as a function of energy from and the kinematic quantity Bjorken x for nuclei Pb, Fe, and C relative to plastic scintillator CH.
The effects of several design parameters including the pretwist angle, the cross section ratio, the viscoelastic parameters and load span length on the stability of the spinning pretwisted cantilevers are also examined.
where ξ is the slenderness ratio (slenderness ratio corresponds to length-to-the least radius of gyration of the cross section ratio) of the nanowire, and for a hinged-hinged beam, ξ = 1 [8].
The estimated ODV per polyhedron ratio of Wt L1 vEGTDEL is then the observed ODV per polyhedron cross section ratio (=1.496), raised to the power 3/2 (=1.830) to translate from two to three dimensions.
The effects of the amounts, cross section ratios, and arrangement forms of the periodic cells on the natural frequencies are explored.
The neutron energy in the measurement was by the cross section ratios of 90Zr(n, 2n 89m+gZr and 93Nb(n, 2n 92mNb reactions.
When the core cross-section ratio changes from 1 to 0.2, the power consumption from the experiments reduces from 41 mW to 1.2 mW with no sensitivity loss.
The measurement has been designed to maximise cancellation of experimental and theoretical uncertainties, and is reported both within a particle-level kinematic range corresponding to the detector acceptance and as a total cross-section ratio.
The neutron flux was determined using the monitor reaction 93Nb(n,2n)92mNb and the neutron energies were determined using the method of cross-section ratio measurements employing the 90Zr(n,2n)89Zr to 93Nb(n,2n)92mNb reactions.
In general, in excited-state absorption (ESA) based all-optical light modulator, maximum signal intensity modulation is achieved at the wavelength corresponding to maximum excited to ground state absorption cross-section ratio.
