Sentence examples for cross section preparation from inspiring English sources
Although it currently includes a finite-difference neutronics solver, the new method has been implemented into a modular code that incorporates the framework for the future coupling to an efficient solver such as a nodal method and to modern cross section preparation capabilities.
Accompanied by detailed analysis of the fractured surfaces by means of scanning electron microscopy (SEM) including cross section preparation by means of focused ion beam (FIB) at the crack initiation area, the experimental results reveal a large scatter and a fatigue strength of 150 MPa at 2 × 106 cycles (R = −1).
In this work, we quantify the errors on nodal cross sections in presence of strong insertion of control rods, using the classical approach for the cross sections preparation based on a single PWR assembly homogenization.
Then the stented arteries were carefully dissected from the myocardium and cut into two pieces equally, each about 9 mm long for cross sections preparation and SEM imaging.
Mass spectrometry was performed on the same sample used for cross-section preparation [46, 47].
Thanks to Melvin Wachowiak, Senior Conservator at the Smithsonian's Museum Conservation Institute who assisted with cross-section preparation and microphotography.
A polyester resin polymerised by a peroxy organic hardener (Cronolite E.I, Plastiform, Spain) was used for the cross-section preparation.
A cross-section preparation was carried out with a FEI Helios NanoLab 660 instrument of the LNNano (CNPEM, Campinas).
Cross-section preparation: the sample is embedded in CEM4000 Lightfix (methylmethacrylate light curing embedding resin supplied by Cloeren Technology GmbH) and polished, with the assistance of a sample holder, on micromesh sheets up to grade 12000.
In addition to the morphological examination of the cross-section preparation and SEM EDS analysis, FTIR spectroscopy supported the conclusion drawn as spectra of bone black, ivory black and carbon black were compared with one obtained from the black sample.
For this purpose, planar and cross-section preparation were applied including mechanical grinding, polishing and argon ion-beam etching followed by deposition of a thin carbon film on both sides.
