Sentence examples for cross section of wires from inspiring English sources

A performance-based design flowchart is also provided along with a design example for determining the pre-strain and the radius of cross section of wires in the SMA wire-based rubber bearings.

With a variation of the modulus of elasticity of the wires, progressive stiffness of the archwires may be achieved without altering the cross section of the wires and have, as advantages, the use of rectangular wires in the first stages of treatment, guidance as to the choice or the wires, and less frequent changes [22].

(W 001):150 nm). Figure 5 shows the cross section of GaAs wires grown by utilizing SiO2-patterned 5°-off (001) GaAs substrate observed from 30° tilted [ 1 1 ̄ 0 ] direction.

As shown already in Ref. [12], the energies of all these interfaces are comparable, and the shape of 3 D nano-objects, from Wulff construction, should be rhombo-cubo-octahedral (the shape of the cross section of the wires should be a regular octagon).

An innovative theoretical model by altering cross section of gold wire is proposed to reinforce the wire sag stiffness of a wire bond that suffered low yield for the applications of 3-dimensional and multi-chip module (MCM) packaging.

After FIB etching the root part of the wire and substrate, cross section of the wire root was characterized by SEM with sample holder rotated 45°.

The ellipse-like cross section of a wire bond is applied as a numerical example to improve the wire sweep stiffness or wire sag stiffness in this study.

But this method neglects the fluctuating wind in vertical direction and cannot consider the cross section of contact wire.

Vickers microhardness tests of the non-immersed and immersed specimens were performed at room temperature from the surface to the center of the cross section of the wire at 0.05-mm 0.05-mmls.

An electronic search in the literature reveals that no information exists about the effects of different cross sections of different wires on the release of Ni and Ti ions.

In Figure 1, we have presented the typical cross section of a parallelogram quantum wire.