Sentence examples for cross section less than from inspiring English sources

In this configuration, the conductive top part, i.e., the 60-mm-diameter sphere and the 0.7-m-long conductive wire (its cross section: less than 5% of the sphere's), become the probe for contact with ambient plasma.

The cross section was less than 100 nm in the TEM observation, as shown in Fig. 3b.

Based on the optimization result, the blank holder is redesigned and machined, stamping test results indicate that defect-free stamping parts are formed with same blank holder forces, and the thickness difference between the original and newly stamped parts along a cross section is less than 0.06 mm, i.e. 4.29% of the initial blank thickness.

A similar situation can be found in the Late Ordovician Fjäcka Shale, Dalarna, Sweden, here an unusual frequency peak of small orthoconic shells with maximum conch cross section of less than 5 mm occurs (Figure 4).

Thin poly styrene210-b-2-vinylpyridine200) and poly styrene210-b-2-vinylpyridine200b-2-vinylpoly styrene210-b-2-vinylpyridine200on and annealed at 180°C for 3 days were directly cross sectioned in less than 1 h using the focused ion beam (FIB) lift-out technique.

From this same grandstand perch, the eighteenth tee and the great home fairway are right in front of us as well, where the Swilken Burn, straight-sided and in cross section no less engineered than the Los Angeles River, leaves town in ampersand fashion on its leisurely way across the eighteenth and first to the sea.

The maximum error of normal flow depth for parabolic cross section is also less than 8 × 10−3% (near exact solution).

Besides, the RMS delay spread for arched cross section corridors are less than those for rectangular cross section corridors regardless of the shapes.

This situation can be explained by the fact that the multipath effect for the arched cross section corridors is less severe than those for the rectangular cross section corridors.

When the batch settler with a large cross section area (H/D ratio less than one) was used, the phases separated much faster than in a settler with a H/D ratio greater than one.

In an April 1942 report, he predicted that this would reduce the reactivity by less than one percent so long as no fission product had a neutron capture cross section of more than 100,000 barns.