Sentence examples for cross section inlet from inspiring English sources

Results show that the channel cross section, inlet gas temperature, and reformer pressure have the largest effect on the reactor performance.

A series of flow visualisation experiments of the surface flow pattern produced by a circular cross-section inlet mounted in a flat plate in a cross-stream have been conducted.

The cross section of inlet chambers are constant, convergent, and divergent along the streamwise direction, respectively.

When the inlet cross section was employed as horizontal, the performance of the collector was reduced by 84% compared to the vertical inlet setting, at 1.00pm.

When the cross section near the diffuser inlet is filled with vapor bubbles, the jet pump reaches its operating limit.

Different sets of boundary conditions are considered, including injections through inner and outer regions of the column inlet cross section.

Fig. 8 Room Temperature valve cross section 1. Stainless gas inlet tube (1/16").

In order to study the mixing, several micromixer made by CO2 laser ablation process with sinusoidal convergent divergent cross section including the T-shape inlet have been employed.

It was found that when the inlet has vertical cross section, it offered the best performance as the velocity and mass flow rate of the air at the chimney was observed to be higher compared with the other three inlet configurations.

Then the influences of friction factor, axial feed per stroke, reduction in cross-section area, inlet angle of hammer, front-pull and back-push forces on the percentage of forward material flow are investigated.

The quantities measured include the local concentration distributions of the secondary fluid at a number of cross-sections, the inlet velocity profiles of both streams, and the static pressure variation along the main duct.