Another explanation might be that smaller cross section increases the wire stiffness [2].
Conversely, the probability of mismatching bases in non-variant cross sections increases with low nucleotide qualities (poor sequencing), high read error rates, multiple hits and error-prone read positions.
The local hardness measured on a coating cross-section increased with increasing Si content.
The results showed that the lateral confinement in the end-zones of the cross-section increased the deformability of the wall by reducing the depth of the compressive zone as well as by increasing the deformability of the confined concrete.
Penetration of 1 mM 20 kDa FITC-dextran at planar surfaces of the soleus axial cross-section increased significantly from 0.52±0.09 mm under 80 min of static (0%) strain to 0.81±0.09 mm under cyclic (3 Hz, 0 20% peak-to-peak) strain, demonstrating the driving effect of cyclic loading on transport.
The ellipticity of the truss cross-sections increased, and the lattice contribution to the core strength decreased as the foam density was reduced.
HFD and obesity in mice lead to cardiac remodeling, which is detected as increased heart mass, increased septal cross-section, increased cardiac fibrosis, and decreased cardiac function [ 8].
In this case, it has been found that, contrary to common expectation, the total cross section increases with energy, a prediction that was later verified experimentally.
Boron, for example, when bombarded by neutrons traveling 1,000,000 cm per second (22,500 miles per hour), has a cross section for the neutron-capture reaction of about 120 barns, and boron's cross section increases to about 1,200 barns for neutrons traveling at 100,000 cm per second.
As the inhibitor loading increases, the maximum scattering cross section increases sharply, and the difference between the measured and predicted inhibition effect widens, suggesting that particle formation is the cause of the deviation.
Owing to the conduction mechanism of the junctionless scheme, the bulk conduction path in the channel is not apt to be fully depleted as the channel cross section increases [7].
