The porous composite had the unidirectionally interconnected micropores along the ice growth direction with a spindle-shaped cross-section (distributed from 40.1 × 11.0 to 110 × 21.8 μm in size).
A variable cross-section (distributed thickness and width) insulation layer of the steel rolling reheating furnace wall is investigated subjected to the constraints of the total volume and cross-sectional area of the insulation material.
Pseudobulbs ovoid, usually round in cross-section, distributed on elongate creeping rhizome, sometimes caespitose, but clusters of pseudobulbs usually distantly remote along the rhizome, with 2 6 foliaceous bracts.
Fibers with circular cross section are distributed with the same periodicity along the two perpendicular directions to the fiber orientation, i.e., the periodic cell of the composite is square.
This theory is extensively applied to bars of arbitrarily shaped doubly symmetric steel cross section, subjected to arbitrarily distributed or concentrated torsional loading and to the most general torsional boundary conditions.
For the specific hollow fiber membrane module in the present study, the inlet holes should be evenly distributed at the cross section to achieve uniform flow distribution in the module.
The resulting 16 × 16 sensitive points are equally distributed over the cross section.
The flow area of this bed is consisted of 350 narrow slots, which are uniformly distributed over the cross section of the cylindrical bed.
Unlike the lumped plasticity model, in the fiber element model, the plasticity is spatially distributed both in cross section and along the member.
Cross-sectional line scan profiling of the sword-like nanostructure showed that the major In and trace Sn elements were homogeneously distributed over the cross section of the stem (Figure 7b).
From the top layer, cross-sectional line scan profiling of the InAlN film showed that the major In and Al elements were homogeneously distributed over the cross section of the stem.
