Sentence examples similar to cross section can be considered from inspiring English sources

Arbitrary cross-section can be considered through Finite Element (FE) discretization according to well-established Semi-Analytical Finite Element (SAFE) procedures.

The stiffness (i.e., the slope of the load deflection diagram) in the very first loading stage is similar for the control and one-ply FRCM specimen configurations, since the contribution of the FRCM to the moment of inertia of the uncracked cross-section can be considered negligible.

"Pretty much any cross section can be made," Fossey says.

With this technique the suspension behavior in an arbitrary cross section can be observed.

The approximate boundary of the cross section can be formulated.

Hence, wider cross-section part acts as an actuator and applies a net amount of tensile strain on the smaller cross-section part that can be considered as the specimen.

Not many cross sections can be obtained absolutely – most cross sections are measured relative to the cross section standards and converted using evaluations of the standards.

Representative cement cross sections can be seen in Figure 6.

Due to low longitudinal strain, the cross-sections of the product can be considered as a plane strain state throughout the entire forming process, allowing utilization of 2-D plane strain simulations to represent for 3-D simulations.

Adopting Bernoulli's hypothesis, linear longitudinal strain distribution along the cross section of the RC beam can be considered.

Structures which have a constant cross-section normal to a longitudinal axis can be considered as waveguides in which vibration can propagate in the form of various waves in the longitudinal direction.