A method for determining the radial distribution of the effective viscosity is proposed, which is based on measurements of the radial profile of the superficial gas velocity just above a cross-section at the end of the bed.
Based on the experimental observations on the lapped connection tests where combined bending and shear is always critical in the cross-sections at the end of laps, an analysis method is proposed to evaluate all the internal forces within the lapped connections.
This paper uses the rigorous solution to investigate the impact of symmetric loading configurations on the interfacial shear stress distributions, and concludes that the bending moments on the cross sections at the plate ends play a significant role in terms of stress concentration, while the shear forces on the same cross-section contribute little to the concentration.
A through-talik was present at the deepest side of the lake, but some permafrost extended laterally beneath the lake bottom at the shallower side, forming an hourglass shape in cross section at one end.
Finally, the cells appear to get compressed at the chloroplast end; thus, the minor axes of the cross-sections at these ends are only one-third or one-fourth the length of the major axes.
For a germinated subpopulation, a newly germinated intact seed (spikelet) was cut in a cross section at 1/3 to the endosperm end.
Another use of the STOP sign was at the last scene, where the road meets at a cross section, indicating the end of the story.
The testing technique is based on the analysis of series of specimens varying in embedment length to simulate several cross sections at only one end of a pretensioned concrete member.
The application of end eccentricities at column ends changed the strain distribution along the column cross-section at the mid-height point, where tensile strain maybe developed based on the end eccentricity value as well as the curvature mode.
In the group that received the triple therapy, tumor size increased by only 52.8% on average with the average tumor 1.25 cm in cross-section at the beginning of the therapy growing to 1.91 cm at the end.
The cross section of beam and the end connector is given in Fig. 3.
