Sentence examples for critical orifice from inspiring English sources

The influence of acoustic background noise has been reduced, for example, by placing sample inlets at nodes of the acoustic pressure [ 118], employing acoustic notch filters [ 118], using subtraction techniques employing two identical resonators with only one containing a laser beam [ 96], and by reducing noise from the sample pump with a critical orifice [ 46].

Flow rates of 1.5 L min−1 (CCN and CN counters) and 7.5 L min−1 (SMPS) were controlled by critical orifices.

These tubes served as critical flow orifices that regulated the flow rate into the canister and ensured that it filled in approximately the same time as the time taken to complete the specific water-use activity being monitored.

The orifice critical cavitation number is closely related to the orifice plate size, and especially closely related with the ratio of the orifice plate radius to the tunnel radius.

Closure of the transgastric access to the peritoneal cavity is a critical step in natural orifice transluminal endoscopic surgery (NOTES).

The subsonic and critical-flow regions for 16 orifice and nozzle flow elements with the following geometries have been tested experimentally: sharp or knife-edge orifices, straight-bore orifices, rounded-entry nozzles, and elliptical-entry nozzles.

Moreover, the trend of the critical flow rate at the orifices was found to be dependent upon the form loss coefficient, but the nozzle and pipe are dependent upon the length.

Firstly, the membranes are characterised with regard to their properties: wetting critical surface tension, expanding hole diameter, orifice coefficients, flexibility, critical and elastic pressures.

Effective and safe access site closure is critical for clinical application of natural orifice transluminal endoscopic surgery.

The approximate formula for the critical cavitation number of the square orifice plate that only considers the main influencing factor was obtained by model experiments.

Actual Diesel engines employ injector characterized by injection pressure till 200 MPa that, associated to micro-orifice design, result in critical flow conditions inside injector holes.