Sentence examples for creeping rate from inspiring English sources

Red and blue curves are calculated velocities of elastic dislocation models for a vertical strike slip fault with a creeping rate of 4 and 6 mm/year, respectively.

Least square fitting for the data at a distance between −100 and 100 km suggests 6.4 ± 1.0 mm/year and 28 ± 10 km for a creeping rate and a locking depth, respectively, but the estimated creeping rate may be an upper bound due to ignoring other deformation sources including interplate coupling along the Nankai Trough.

The calculated velocities are shown by red and blue curves with a creeping rate of 4 and 6 mm/year and a locking depth of 16 km (Fig. 2a).

Laser-interferometric creep rate spectroscopy.

This effectively decreases minimum creep rate and improves creep life.

Significantly, we observe a biphasic dependence of the creep rate on applied stress: below a critical stress threshold, the creep rate increases linearly with applied stress; above that threshold, the creep rate becomes independent of applied stress.

Regardless of the creep mechanisms involved, temperature can alter several factors those are important to creep rate.

After the creep rate minimum, creep rates increase more strongly as a function of strain for [1 1 0] tensile loading.

Open image in new window Fig. 7 The creep stiffness (S) and creep rate (m) of fiber-modified asphalt mortars.

However, fibers had a negative effect on the creep stiffness and creep rate of the asphalt mortar.

However, the actual creep data shows a higher creep rate as time goes on.