Sentence examples for cracks length from inspiring English sources

The crack propagating paths were significantly changed and the cracks length was visibly prolonged through crack deflection and crack blunting.

In the paper the effects of cracks' length and orientation on the buckling loads of rectangular elastic thin-plates – characterised by different boundary conditions and by various Poisson's ratio – under tension and compression, is considered.

In spite of efforts to reduce the slope gradient to 1 1.3 including removal of the observed tension cracks (Length: 40 m, Depth: 3 – 4 m) for stabilization of the slope, a large-scale tension cracks (Length: 90 m, Depth: above 7 m) reoccurred during the excavation.

Following this, the ground deformation including the additional tension cracks (approximately 10 m in length) and the vertical offset by the extension of main tension cracks (Length: 80 m) were discovered.

Under elevated temperature, cracks gradually generated and the cracking density, intracrystalline crack length, and crack width of aggregates increased.

Different boundary conditions, crack length and orientation are considered.

The related crack length is estimated using an exhaustion method.

The stable crack length is characterized by a dimensionless fracture-mechanics quantity required to attain the associated crack length.

Also, MWM conductivity measurements correlate with crack length, permitting crack length monitoring.

Examined and tried a jalousie whose crack length was doubled, while the allowable air infiltration was halved.

For unidirectional laminates, the transverse crack length is governed by thickness, whereas for multidirectional laminates the transverse crack length is controlled by the ply angle and stacking sequence.