Sentence examples for cr metal from inspiring English sources

The chromium (Cr) metal as a top electrode (TE) was deposited by radio frequency (RF) sputtering.

The Cr metal target with a constant argon (Ar) gas flow rate of ten sccm was used.

Evaporated Cr metal of approximately 25-nm thickness was then lifted off with the solution of N-methyl-2-pyrrolidone in ultrasonic bath.

b HRTEM image shows a CrO x layer in between TiO x switching and Cr electrode because of partially oxidization of Cr metal during deposition.

The sample was finally baked at 145°C for 5 min. After development, 20 nm thick chromium (Cr) metal was deposited by an electron beam evaporator.

Interestingly, the Cr metal loading percentages determined by EDS are slightly higher with the 5% Cr sample having a loading of ~ 11%.

This suggests that Fe and Cr metals are located in the micropores of the zeolite which leads to pore blocking.

SG SWNTs were synthesized in a fully automatic tube furnace by water-assisted chemical vapor deposition using a C2H4 carbon source on Fe-Ni-Cr alloy metal foils (YEF426) with Fe/Al2O3 catalyst metal films [8].

However, investigations of the marginal discrepancies and internal spacing of cobalt-chromium (Co-Cr) metal copings fabricated using SLA are lacking.

It is considered to develop as a result of a delayed hypersensitivity response to Co-Cr metal wear debris.

Vascular occlusion, either due to a vasculitis or a toxic effect on blood vessel walls associated with Co-Cr metal wear particle deposition (Evans et al. 1974, Winter 1974, Jones et al. 1975, Doorn et al. 1996, Willert and Semlisch. 1997), has been suggested as a cause of this tissue necrosis in long-term and short-term first- and second-generation MoM hip replacements.