Sentence examples for coupler in a from inspiring English sources

A small-size optical interleaver based on directional coupler in a 2D photonic crystal slab with triangular lattice of air holes is designed and theoretically simulated using plane wave expansion and finite-difference time-domain method.

To achieve both transmissions with independent performance, the MMI filters were disposed between two 50/50 fibre couplers (coupler 1 and coupler 2) in a MZ interferometer configuration as it is shown in Fig. 2a.

The designed X-band accelerating structure is a constant gradient structure with a 4π/5 operating mode and input and output dual-feed couplers in a racetrack shape.

The inverted taper coupler, embedded in a polymer waveguide, is optimized for both the transverse-magnetic and transverse-electric modes through tapering the width of the silicon-on-insulator waveguide from 450 nm down to less than 15 nm applying a thermal oxidation process.

The sensor incorporates a grating coupler, patterned in a thin noble metal film (Au or Ag, respectively) for excitation of SPR by monochromatic laser light and a thin film thermal sensor for detection of the temperature change by absorbed radiation power.

Following standard measurement techniques (ANSI 3.22 1997), the directionality of the experimental hearing aids was measured in situ using a ½″ reference microphone (GRAS, Holte, Denmark), preamp (GRAS), and Zwislocki coupler mounted in a manikin (KEMAR) with artificial pinnae.

The base technology upon which the network will be based is called Combined Charging System (CCS), which is a quick-charging method that uses a combo AC/DC connector referred to as the "Combo Coupler" in order to deliver a max 350 kW delivery charging rate.

If you want to be able to change tips, put a coupler in there first and screw the tip onto the coupler!

The light launched from the PDU was divided by a 20/80 coupler in two arms going respectively to the ophthalmic interface for imaging and a calibration mirror (C) for the generation of a reference signal.

It consists of a quadrature hybrid coupler in whose coupled ports, two identical terminations are placed.

This paper presents the analysis and design of a hybrid lumped-element coupler in which the loss of components is considered.