Sentence examples for corrosive solution from inspiring English sources

Then it is modified for corrosion detection when it was placed inside a corrosive solution.

Results showed that the corrosion rate and the corrosion mechanisms vary with the applied shear stress and that corrosion products strongly depend on the composition of the corrosive solution.

Corrosion performance of the coatings in 0.5 M NaCl as the corrosive solution was investigated by the potentiodynamic polarization method.

The "electroless" deposition mechanism and the film growth kinetics are investigated and the formed pre-film of E-coating is evaluated for its stability and corrosion protection performance in a phosphating acidic electrolyte and a NaCl corrosive solution.

This corroborates the involvement of plant extract molecules in blocking the corrosion cells on carbon steel surface by decreasing the contact between carbon steel surface and the corrosive solution that sequentially inhance the inhibition characteristics and show better corrosion protection for the metal surface [40, 41].

Trivalent cations (i.e., Fe3+) can be produced in situ from iron plates in the corrosive solution.

Moreover, the superhydrophobic Ce coating has good chemical stability because it exhibits low corrosion current density in various corrosive solutions except the solution with strong alkalinity.

UV visible absorption spectrophotometric method was applied on the corrosive solutions produced from the corrosion of iron samples, either without or with PSC_1 and PSC_2 in 2.0 M HNO3; and PSC_1 and PSC_5 in 2.0 M NaOH, respectively.

The formation of Ti- and Zr-enriched highly protective thin surface films is responsible for the high corrosion resistance of this alloy in corrosive solutions.

When BTA-loaded raspberry-like hollow microspheres are embedded in a water-borne polyurethane film, the obtained composite film can protect the copper from corrosion both in acidic and alkaline corrosive solutions.

With the immersion time of SAMs-coated copper electrode in NaCl and HCl corrosive solutions increasing, a slow loss of corrosion protection ability of SAMs indicates dynamic processes occurring at the electrode/solution interface and in the monolayers, such as expansion of the defects and transport of corrosive ions through defects of SAMs.