Sentence examples for corrosion depth from inspiring English sources

Caleyo, F., Velázquez, J. C., Valor, A. & Hallen, J. M. Probability distribution of pitting corrosion depth and rate in underground pipelines: A Monte Carlo study.

Consequently corrosion depth and stability of those oxide layers were characterized based on the analyses.

In the case of pitting corrosion in the sample, the depth of the pits was measured directly and estimated as total corrosion depth with general corrosion layer.

The results showed that the corrosion depth and LBE penetration through the grain boundaries of the 316SS-GBEM were smaller than those of the 316SS-BM.

(2) Generally, the joint opening decreases with the increasing of bolt pretightening force, and increases with the increasing of concrete delamination depth and bolt corrosion depth.

Results of concrete corrosion depth, mass loss, compressive strength and elastic modulus were statistically analyzed and modeled.

The corrosion depths are 0.5 2.1 mm.

The prisms were uniformly corroded up to various corrosion depths.

For the shear loading tests, a total of five plate girder specimens were fabricated to consider different corrosion heights and mean corrosion depths of a corroded web based on the corrosion pattern of the web of a plate girder bridge.

Greater corrosion depths are visible in Fig. 7c after cleaning the steel bar. Figure 7b shows the steel bar before cleaning and Fig. 7d shows the same, clean steel bar surface at the opposite side of cracks.

After pit nucleation, pit growth can be estimated in terms of a change in the volumetric rate by using Faraday's law (Jones 1992): pleft( t right) = 0.0116alpha int {i_{corr} left( t right)dt} (5 where p t) is the pit depth (in mm) at time t, α is the ratio between pitting and uniform corrosion depths, and i corr (t) is the time-variant corrosion rate (μA/cm2).