Sentence examples for corresponding torque from inspiring English sources
The torque exerted during a simulation was determined by multiplying maximum voluntary torque and the corresponding torque activation level which was specified as a function of time using flexor and extensor torque activation profiles.
Quantitative data successfully acquired using this method included the approximate ankle angular position, where the velocity-dependent characteristics of stiffness was notably initiated and its corresponding torque and velocity.
Here we extend the PIEP force model of Akiki et al. [3] with a corresponding torque model to systematically include the effect of perturbation fields induced by the neighbors in evaluating the net torque.
Something closer to 125-130 hp, with a corresponding torque bump, is all that's needed.
It can be seen from Fig. 7 and Table 2 that, with the increase of the T M ratio from 1 5 to 1 0, for every characteristic loading state, the corresponding torque increased while bending moment decreased.
The equipment rotates the center cylinder immersed in concrete at a fixed rotation speed, and it measures the corresponding torque to calculate the rheological properties of the slip layer.
After a few pre-processing steps characterizing the minimum-time trajectory and the corresponding torques, a second neuro-fuzzy controller is built.
It was mechanically designed to rotate around an approximated axis of the ankle joint and to measure ankle joint angular position and its corresponding resistive torque.
The prototype has a mass of about 0.6 kg, with an output force about 94 N (corresponding to torque of over 10% of the nominal biological moment at the hip during unloaded walking), a power consumption of about 1.6 W.
Using this method of on-chip optomechanical coupling, angular and displacement noise floors of 4 nrad/ and 2 fm/ have been demonstrated, corresponding to torque and force sensitivities of and 132 aN/, respectively.
(8 whereas M xi, the corresponding friction torque of the newly designed disc cutters, is given by: M_{xi}^ = F_{xi} eta = 2kleft( {1 + frac{uppi}{2} - alpha_{i} } right)A_{x} frac{{sqrt {6rh - h^{2} } }}{3}.
