Sentence examples for corresponding to the performance from inspiring English sources

The line corresponding to the performance of our scheme almost touches the horizontal axis and hence can hardly be seen.

In Figure 2, the line corresponding to the performance of our scheme almost touches the x-axis throughout the range.

The power matching ratio of the two end nodes in TWRC is corresponding to the performance of symbol error rate in the multiple access phase [9, 10].

In case of zero performance, the experts were asked to compile pair-wise comparison matrices, using verbal judgements corresponding to the performance of the alternatives.

The load-control mode was considered to meet 2%% drift, corresponding to the LS performance level as described in FEMA356 (2000) code.

The histogram of CoP of On cycles, grouped in (Cluster_2), is shown in Fig. 12 in support of the argument that (Cycle_2) is representing the group of On cycles corresponding to the normal performance of the chiller.

In addition, the resistance of NMO/CNT gradually increases with the progress of the cycle as shown in Fig. 7b, which is related to the internal activation of the electrode, corresponding to the cycling performance image (Fig. 5a).

An investigation based on sequential analysis inspired by FEMA356 is performed here on the immediate occupancy (IO), life safety (LS) and collapse prevention (CP) performance levels of two portal frames, after they are pushed to arrive at a certain level of displacement corresponding to the mentioned performance level.

Based on JBDPA, Meada and Kang (2009) and Nakano et al. (2004) showed in several studies that when a structure sustains severe damage (corresponding to the CP performance level in FEMA356) crushing and spalling of the concrete cover with consequent exposed reinforcement is observed.

The number of sequenced reads obtained from the two RNA-seq experiments (Table  1) was very close to the values corresponding to the highest performances of the 454 GS FLX pyrosequencer and of the MiSeq platforms, as indicated by the manufacturer.

The first reverse problem identifies the input molecules' property targets corresponding to the desired process performance.