Sentence examples for corresponding temperature for from inspiring English sources

The corresponding temperature for the hexaaluminate was 640°C.

Then fixed cells were stained by biotinylated CTB or biotinylated antibody (anti-CD59 or anti-CD71) at the same temperature as fixation for 20 min. After 3× washes with 5% FBS in PBS, streptavidin-conjugated QD655 dyes were incubated with the cells at corresponding temperature for 20 min, followed by 3× washes with 5% FBS in PBS.

This was plotted against the corresponding temperature for each treatment (Fig.  7C) and showed an exponential reduction from a value of 1·4/HS at 1 °C to the base value of 0·08/HS at 23 °C.

The maximum rates of degradation and corresponding temperatures for various nanocomposites are reported in Table 5.

Finally, the samples were post-fixed by 2% FA at corresponding temperatures for 30 min and then subject to confocal microscopy on a Carl Zeiss LSM510 Meta5 laser scanning confocal microscope equipped with a 100×1.30 oil-immersion objective.

A simple theoretical model is used to calculate dimensionless breakthrough curves and the corresponding temperature profiles for a non-isothermal adsorption column, operating under constant pattern conditions.

In addition, the relationship between the dry biomass measured 23 years from 1983 at a grassland and the corresponding temperature accumulated for higher temperature than 5 °C (AET) and precipitation accumulated after 1 April (CP) was determined.

Finally, if we rewrite the equation as a function of C t and rename Tmax - Tref = ΔT, we obtain the following expression, in which all the terms can be gotten from the calculation of the thermal parameters and the corresponding temperature curves for a fixed laser power irradiation: η = C d Δ T - Q ˙ 0 I 1 - 10 - A λ (12).

The nucleotide sequence of these primers and the corresponding temperature profiles for amplification have been described (4).

The design of a variotherm injection mold and the corresponding temperature control system for metal-polymer joining was reported.

The PCR conditions consisted of 94°C for 5 min, followed by 35 cycles of 94°C for 35 seconds, annealing at the corresponding temperature (shown in Table 2) for 35 seconds and 72°C for 35 seconds, and a final extension at 72°C for 5 minutes.