Sentence examples for corresponding inlet from inspiring English sources

The solid lines in Figure 10 represent calculated values of carbon monoxide conversions at chemical equilibrium for the corresponding inlet gas compositions.

Wind tunnel tests and numerical simulations were conducted to investigate the feasibility of the control mechanism, as well as to acquire corresponding inlet flow details.

An Ultrason ES-OVM chiral column (2 mm × 150 mm, 5 μm) was used in tandem with an Agilent rapid resolution microbore Zorbax SB-C18 RRHD column (2.1 mm × 100 mm, 1.8 μm) with corresponding inlet filters for guarding the columns.

A first design with straight connections between the first nozzle and the corresponding inlets, and a second design with zigzag channels between the inlets and the first nozzle were tested (Fig. 2).

A total of 5 μl of each pre amplified cDNA sample and 5 μl of each DeltaGene assay were dispensed into their corresponding inlets on the Dynamic array™ and samples were subjected to RT-qPCR reaction using the following thermal cycling protocol: 70°C, 40 min; 60°C, 30 s; 95°C, 1 min; 35 cycles (96°C, 5 s; 60°C, 20 s) and melting curve using a ramp from 60°C to 95°C at 1°C/3 s.

The separation compartments are formed from grids as thin as 1.2 mm and polyacrylamide membranes as thin as 0.15 mm, all with corresponding multiple inlet and outlet ports.

Furthermore, similar mean axial-velocity profiles are observed in the current study to those reported for the corresponding "normal" inlet orientation liquid liquid flows.

The criterion limits the maximum allowable temperature on an objective basis and permits the calculation of the corresponding critical inlet values for the operating variables, like partial pressure of the reactant, temperature of the reactor fluid, temperature of the cooling medium, coolant flow rate, reactor throughput...

For transient operation where the time to light-off is important, it is shown that for the case of back-end ignition (corresponding to low inlet temperatures or low catalyst loading), metallic substrates are again superior.

Calculations reveal that the recirculation zone length correlates with a chemical time scale based on the flame extinction strain rate corresponding to the inlet fuel composition, stoichiometry, pressure and temperature; and are consistent with experimental data in literature.

Bilaterally normal R2 components reflect the integrity of the trigeminal spinal tract and the corresponding fiber root inlets.